Spherical roller bearing has two rows of rollers, which mainly bear radial load, but also can bear axial load in any direction. High radial load capacity, especially suitable for heavy loads or vibration loads, but can not withstand pure axial load. The raceway of the outer ring of this kind of bearing is spherical, so it has good aligning performance and can compensate the coaxiality error.

Bearing description:
The spherical roller bearing has a double row of rollers, with one common spherical raceway in the outer ring and two raceway in the inner ring and inclined at an Angle relative to the bearing axis. This ingenious structure makes it self-aligning, so it is not easy to be affected by the Angle of shaft and bearing box on the error or shaft bending, suitable for installation error or shaft deflection caused by Angle error. The bearing can bear radial load as well as bidirectional axial load.  

The inner hole of the self-aligning roller bearing has two kinds: cylindrical and conical, and the taper of the conical cone hole is 1:30 and 1:12. This kind of conical inner hole bearing is equipped with a tight sleeve or a disconnecting sleeve, so that the self-aligning ball bearing with the conical inner hole can be conveniently and quickly assembled on the optical shaft or the stepped machine shaft.
 

SPHERICAL ROLLER BEARINGS

Spherical roller bearings consist of a common spherical raceway outer ring and two rows of spherical rollers between the double raceway inner ring. The spherical roller bearings is self-aligning, and can automatically adjust the misalignment caused by the deflection or misalignment of the shaft or bearing seat, and the allowable alignment angle is 1~2.5 degrees. Spherical roller bearings can bear radial load, bidirectional axial load and its combined load, especially the radial load capacity is large, and it has good anti-vibration and impact resistance. It is widely used in iron and steel metallurgical equipment, mining equipment, cement machinery, paper machinery, ships, coal mills, petroleum machinery, engineering machinery, etc.

Installation method:

The inner hole of the spherical roller bearing has two installation methods: cylindrical and conical, and the conical tapered hole is 1:12 and 1:30. By unloading the sleeve, the bearing can be installed on the optical shaft or stepped shaft conveniently and quickly. The cylindrical inner hole can also be installed on the tapered shaft with an inner taper sleeve.